空調移機方法和步驟
空調移機方法和步驟
Air conditioner moving method and steps
1、前期準備:移機人員上門拆機并帶齊全套工具、材料及安全設備。免費檢查，先報價，后維修，不維修不收取任何費用等優惠政策，徹底根除了消費者的后顧之憂，肅清了游離在行業邊緣的"螺絲刀加工廠"，保護了消費者的利益，同時也給足了消費者的選擇權，真正做到了客戶才是上帝。
1. Preliminary preparation: the relocation personnel shall dismantle the machine on site and bring a complete set of tools, materials and safety equipment. Free inspection, first quotation, then maintenance, no maintenance, no charge and other preferential policies have completely eradicated the worries of consumers, eliminated the "screwdriver processing factory" on the edge of the industry, protected the interests of consumers, and gave consumers the right to choose. The customer is the God.
2、回收制冷劑:首先開機制冷，外機運行后收氟關閉小閥門，閥門結霜有化掉后關閉大閥門，立刻關機。拉掉電源，擰緊保險帽，使空調移機器中的制冷劑收集到室外機中去。
2. Recovery of refrigerant: start up the refrigerator first, collect fluorine after the external machine runs, close the small valve, close the large valve after the valve frosts and melts, and shut down immediately. Pull off the power supply and tighten the safety cap to collect the refrigerant in the air conditioner into the outdoor unit.
3、拆室內機:拆卸室內機時，應防止冷凝水流進線路板。
3. Disassemble the indoor unit: when disassembling the indoor unit, prevent condensate from flowing into the circuit board.
4、拆室外機:拆卸室外機時，在卸放的同時注意平衡避免振動搖晃，用塑料包好以便搬運。
4. Disassembly of outdoor unit: when disassembling the outdoor unit, pay attention to balance during unloading, avoid vibration and shaking, and wrap it with plastic for handling.
5、安裝:空調重新安裝時應注意安裝位置與對流。用洗滌劑進行檢漏，觀察每一個接頭有無氣泡冒出，驗明系統確無泄漏后，旋緊閥門保險帽即可。
5. Installation: pay attention to the installation position and convection when reinstalling the air conditioner. Conduct leak detection with detergent, observe whether there are bubbles at each joint, and tighten the valve safety cap after verifying that the system has no leakage.
